Fields tutorial

As you may known, in our terminology, a device corresponds to an IoT hardware – like ESP8266 or Raspberry Pi – so that, the device is the entry point of your journey with our services. We have nodes and a node corresponds to a sensor or an actuator and attached to one device.

Also, we have fields and a field corresponds to a measurement like temperature or humidity.

Example project

Arduino send measurement
You can easily send measurements to our cloud services.

Step 0: Known your devices and nodes

Be sure you have read and understand the Devices section.

Be sure you have read and understand the Nodes section.

Step 1: List of your fields

After you have created a device, there are no fields in it.

Step 3: Fill up the form

Give a name and a description to your field.

Step 4: Your new field is on the list

Check to see if your new field is on the list and tap or click on the name link.

Step 5: Details of your field

Here is the details of your field, you can edit the editable fields and save the changes with the 'Save' button.